膩?zhàn)臃凼窃谘b修中是一種常見的裝飾材料，主要是用于墻面修補找平，為之后涂刷油漆打下良好的基礎。

Putty powder is a common decorative material in decoration, mainly used for wall repair and leveling, laying a good foundation for subsequent painting.

一、膩?zhàn)臃鄣淖饔?/p>

1、 The function of putty powder

1.裝飾美化功能：

1. Decoration and beautification function:

膩?zhàn)臃鄣氖褂每梢允箟γ娓庸饣?xì)膩，由于部分油漆對于墻面的光滑度要求極高，膩?zhàn)臃劭梢院芎玫母纳茐γ婀饣取?/p>

The use of putty powder can make the wall more smooth and delicate. Due to the extremely high requirements of some paints for the smoothness of the wall, putty powder can effectively improve the smoothness of the wall.

2.抗裂防滲功能：

2. Anti crack and anti-seepage function:

膩?zhàn)臃劬哂械目沽研阅懿皇潜旧硭哂械模饕翘砑恿似渌目沽烟砑觿┎艜?huì)有抗裂的效果，因此膩?zhàn)臃鄣目沽研ЧQ于膩?zhàn)臃酆涂沽焉皾{產品之間的和諧型和互助性。

The crack resistance performance of putty powder is not inherent in itself, but mainly depends on the addition of other crack resistance additives to achieve crack resistance. Therefore, the crack resistance effect of putty powder depends on the harmony and mutual assistance between putty powder and crack resistant mortar products.

3.基層找平功能：

3. Grassroots leveling function:

基層找平是膩?zhàn)臃鄣幕镜囊粋€(gè)作用了，膩?zhàn)臃鄣闹饕饔镁褪翘钇綁γ姘纪共黄降牡胤剑菇ㄖ锔拥皿w美觀。膩?zhàn)臃塾脕?lái)找平是最基本的一個作用，也是最重要的一個作用。

Grassroots leveling is a basic function of putty powder. The main function of putty powder is to fill the uneven areas of the wall surface, making the building more appropriate and beautiful. Putty powder is the most basic and important function for leveling.

二、膩?zhàn)臃墼趺从?/p>

2、 How to use putty powder

1、外墻膩?zhàn)樱?/p>

1. External wall putty:

攪拌：水的加入量以施工稠度為準，攪拌均勻后再放置十分鐘，再進行攪拌即可使用。

Stirring: The amount of water added is based on the construction consistency. After stirring evenly, let it stand for another ten minutes before stirring to use.

刮涂找平：由于膩?zhàn)訌?qiáng)度高，應在膩?zhàn)犹幱诎敫蔂顟B(tài)下（用手輕壓不變形）用刮板收光找平。

Scraping and leveling: Due to the high strength of the putty, it should be smoothed and leveled with a scraper when the putty is in a semi dry state (gently pressed by hand without deformation).

2、內墻膩?zhàn)樱?/p>

2. Interior wall putty:

攪拌：水的加入量以施工稠度為準，攪拌均勻后再放置十分鐘，再進行攪拌即可使用。

Stirring: The amount of water added is based on the construction consistency. After stirring evenly, let it stand for another ten minutes before stirring to use.

表面處理：墻體表面應堅實無浮灰和污物，墻體表面含水率要低于5%。

Surface treatment: The wall surface should be solid and free of floating ash and dirt, and the moisture content of the wall surface should be less than 5%.

膩?zhàn)优涮祝喝绻麎γ嫫交驗樾滦徒ㄖ牧希栌媒缑鎰┻M(jìn)行界面處理。

Putty matching: If the wall is smooth or made of new building materials, an interface agent needs to be used for interface treatment.

刮涂找平：膩?zhàn)诱移綉?yīng)在半干狀態（用手輕壓不變形）完成，等膩?zhàn)庸坦袒笤僬移健?/p>

Scraping and leveling: The putty leveling should be completed in a semi dry state (gently pressed by hand without deformation), and then leveled after the putty has solidified.