部分消費者在購買建筑裝飾材料的時候會將粘結砂漿與抹面砂漿會混淆，下面濟南抹面砂漿廠家來告訴您兩者之間有何區別。

Some consumers will confuse bonding mortar and plastering mortar when purchasing building decoration materials. Now Jinan plastering mortar manufacturer will tell you the difference between the two.

一、粘結砂漿

1、 Bonding mortar

粘結砂漿是屬于保溫材料類產品，抹面粘結砂漿它是由水泥、石英砂、聚合物膠結料配以多種添加劑經機械混合均勻而成。

Bonding mortar is a product of thermal insulation materials. Plastering bonding mortar is made of cement, quartz sand, polymer cement and a variety of additives through mechanical mixing.

其主要用于粘結保溫板的粘結劑，由于剛性的基層墻體與柔性的保溫芯材之間無法粘結在一起，而粘結砂漿就很好地解決了這個問題。

It is mainly used as the adhesive for bonding the insulation board. Since the rigid base wall and the flexible insulation core cannot be bonded together, the bonding mortar can solve this problem well.

而粘結砂漿的粘結強度高是其產品的一大亮點，因?yàn)槠浣?jīng)過優良改性特制水泥及多種高分子材料、填料經獨特工藝復合而成，不僅如此，其保水性也很好。

The high bonding strength of bonding mortar is a highlight of its products, because it is compounded by excellent modified special cement and a variety of macromolecular materials and fillers through a unique process, not only that, but also its water retention is very good.

而好的粘合砂漿與基層墻體的粘結強度可以達到1.0Mpa,粘合砂漿與EPS保溫板的粘結強度可達0.2Mpa，粘合砂漿與XPS保溫板的粘結強度可達0.4Mpa。

The bonding strength between good bonding mortar and base wall can reach 1.0Mpa, the bonding strength between bonding mortar and EPS insulation board can reach 0.2Mpa, and the bonding strength between bonding mortar and XPS insulation board can reach 0.4Mpa.

二、抹面砂漿

2、 Plastering mortar

抹面砂漿是指涂抹在基底材料的表面，其大的作用為保護基層，防止墻面開裂反堿等問題的出現。

Plastering mortar refers to coating on the surface of the base material, which plays a major role in protecting the base course and preventing wall cracking and alkali reaction.

在噴涂抹面砂漿時，抹面層不承受荷載，抹面層與基底層要有足夠的粘結強度，在施工時一定要注意分層涂抹，抹面砂漿一般是分為兩層或三層進行施工。

When spraying the plastering mortar, the plastering layer shall not bear the load, and the plastering layer and the base layer shall have sufficient bonding strength. During the construction, pay attention to the layered application. The plastering mortar is generally divided into two or three layers for construction.

抹面砂漿而且要求噴涂的面層都要平整、光滑。而且在抹面砂漿施工時要求周?chē)悄嫔皾{干燥環境，使得噴涂過后抹面砂漿能夠大面積暴露在空氣中。

The plastering mortar and the sprayed surface shall be flat and smooth. In addition, during plastering mortar construction, it is required to have a plastering mortar dry environment around, so that the plastering mortar can be exposed to air in a large area after spraying.

除此之外，抹面砂漿同時也具備憎水功能，以防止水分過多而導致是施工墻面脫落，因?yàn)榭梢栽谥虚g形成一個可呼吸的保護層，抹面砂漿可以做到防水透氣，以提升墻面保溫施工質量。

In addition, the plastering mortar also has the hydrophobic function to prevent the construction wall from falling off due to excessive moisture, because a breathable protective layer can be formed in the middle, and the plastering mortar can be waterproof and breathable, so as to improve the construction quality of wall insulation.

粘結砂漿與抹面砂漿有什么不同？以上就是廠家為您所講解的兩者區別，您可以作為參考使用，更多相關內容事項就來我們網站http://www.zzmdwxsh.com咨詢吧！

What is the difference between bonding mortar and plastering mortar? The above is the difference between the two that the manufacturer explained to you. You can use it as a reference. For more information, please come to our website http://www.zzmdwxsh.com Consult!