1. Decoration wall cracks: Decoration cracks show uneven distribution with the change of foundation. This is caused by the settlement and deformation of the decoration wall

1)如果是裝修建筑一直沉降變形、不要忙于修補,等待不再變形時再進行裝修修補。

1) If the decoration building has been subsidence deformation, don't be busy with repair, wait for no longer deformation to repair.

2)裝修修補要根據裂縫形狀、密度大小而采取多種方案,可用開槽修補或者加網格布修補,必須用高彈膩子粉。

2) According to the shape and density of the cracks, a variety of schemes should be adopted for decoration repair. Slotting repair or mesh cloth repair can be used, and high elastic putty powder must be used.

2、裝修粉刷層裂縫：找平砂漿柔性不夠,表現為比較大的龜裂紋,一般是均勻的分布。用高彈膩子或雙組份彈性膩子粉滿批,分別修補。

2. Cracks in the decoration and painting layer: the leveling mortar is not flexible enough, showing relatively large cracks, which are generally evenly distributed. Use high elastic putty or two-component elastic putty powder for full batch repair.

3、裝修保溫層裂縫：一般呈現不規則的裂縫是比較常見。是由于苯板的收縮變形、網格布、砂漿、不正確的裝修施工等很多原因造成的。解決辦法應根據裂縫的大小及分布不同而定,如果比較嚴重,有必要加貼網格布或網布,如果不嚴重就用雙組份的柔性膩子粉滿批。

3. Decoration insulation layer cracks: generally irregular cracks are more common. It is caused by shrinkage deformation of benzene board, grid cloth, mortar, incorrect decoration construction and many other reasons. The solution should be determined according to the size and distribution of cracks. If it is serious, it is necessary to stick mesh cloth or mesh cloth. If it is not serious, use two-component flexible putty powder to fill the batch.

4、膩子層裂縫：一般表現為細微的龜裂紋,均勻分布,注意不是縫是紋,紋和縫是有區別的。

4. Putty layer crack: general performance for the subtle turtle crack, uniform distribution, attention is not seam is grain, grain and seam is different.